NTP Server Status Alarm
acNTPServerStatusAlarm
|
Alarm |
acNTPServerStatusAlarm |
||
|---|---|---|---|
|
OID |
1.3.6.1.4.1.5003.9.10.1.21.2.0.71 |
||
|
Description |
The alarm is sent when the connection to the NTP server is lost. Cleared when the connection is reestablished. Unset time (because of no connection to NTP server) may result with functionality degradation and failure in device. If the device receives no response from the NTP server, it polls the NTP server for 10 minutes for a response. If there is still no response after this duration, the device declares the NTP server as unavailable, by sending this alarm. The failed response could be due to incorrect configuration. |
||
|
Default Severity |
Major |
||
|
Source Varbind Text |
Board#1 |
||
|
Event Type |
communicationsAlarm |
||
|
Probable Cause |
communicationsSubsystemFailure |
||
|
Severity |
Condition |
Text |
Corrective Action |
|
Major |
No initial communication to Network Time Protocol (NTP) server. |
"NTP server alarm. No connection to NTP server." |
Repair NTP communication (the NTP server is down or its IP address is configured incorrectly in the device). |
|
Minor |
No communication to NTP server after the time was already set once. |
- |
- |